NEW! TCIII-1800IC256-3D NAND Flash / eMMC System

NAND Flash Support Features

  • Test Frequency:
    - 3D NF: Supports up to 600Mhz
    - 2D NF: Supports up to 200Mhz
  • Switching Data Rate:
    - 3D NF: Supports up to 1200Mbps
    - 2D NF: Supports up to 400Mbps
  • I/O Interface: ONFI 1.0, ONFI 2.0, ONFI 3.0, ONFI 4.0
  • VCCQ Voltage: 1.8V (max)
  • 3D NAND Flash speeds up to 1200Mbps
  • Operating clock frequency up to 600MHz
  • Configurable for testing from 16 to 256 IC's in Parallel and at speed
  • IC components, custom test sockets and load boards
  • Supports DC short and Leakage testing
  • Provides DC / ICC / AC parametric tests
  • Read ID Function
  • Built-in ICC Patterns
    - Sequential read operating, Erase operating, Stand-by current (TTL), etc.
  • Over 20 Industry AC Patterns
    - AC Timing mode for Async, Sync and Toggle, respectively
    - Supports Block / Page / Column modes
    - Read and Mark bad Block
    - Supports cache read, sequential read and copy back

Optional Testing Functions

  • Supports integrate the use of Signal Tap software
  • User-defined Script Code test patterns programming

Home Screen
The Home Screen page provides users the ability to customize their testing options and
administration settings.

Script Code Program
Allows users to use Script Code programming language to create customized test patterns (optional).

Signal Tap Tool
The Signal Tap tool serves as a powerful compiler/debug tool and allows users to monitor the timing waveform of the programming algorithm.

eMMC Support Features

  • Supports High Speed, HS200 and HS400 modes
  • VCCQ Voltage: 1.8V (max)
  • Configurable for testing from 16 to 256 IC's in parallel and at speed
  • Supports IC components, custom test sockets and load boards
  • Supports DC short and Leakage testing
  • Provides DC / ICC / AC parametric tests
  • Read ID Function
    - CID (Device Identification) Register Read
    - CSD (Device-Specific Data) Register Read
    - Extended CSD Register Read
  • User Area Erase
  • User Area Data Write - Single-block Write and Multiple-block Write
  • User Area Data Read - Single-block Read and Multiple-block Read

Handler Interface

The TurboCATS series supports both manual and automated handler testing. Designed to easily integrate with various handlers.

Features:

System and Software Features

  • Supports DC short and Leakage testing
  • Provides DC/ICC/AC parametric tests
  • VCCQ Voltage: 1.8V (max)
  • Read ID Function
    NAND Flash IC
    Built-in ICC pattern includes:
    - Sequential read operating, erase operation, stand-by current (TTL), etc
    eMMC IC
    - CID (Device Identification Register) Read
    - CSD (Device-Specific Data) Read
    - Extended CSD Register Read
  • Provides industry AC patterns
    NAND Flash IC
    - AC Timing mode for Async, Sync and Toggle, respectively
    - Supports Block / Page / Column modes
    - Read and Mark bad block
    - Supports cache read, sequential read, copy back, etc
    eMMC IC
    - Supports High Speed, HS200 and HS400 modes
    - User Area Erase
    - User Area Data Write / Read
    - Single-block and Multiple Write / Read
  • Configurable for testing from 16 to 256 IC's in parallel and at speed

Optional Integration

  • Supports IC components, custom test socket and load boards
  • Supports manual or automated handler testing
  • Designed to easily integrate with various handlers

Specifications:

NAND Flash Support Specification

Test Frequency: 3D NF - SupportS up to 600MHz
2D NF - SupportS up to 200MHz
Switching Data Rate: 3D NF - Supports up to 1200Mbps
2D NF - Supports up to 400Mbps
I/O Interface: ONFI 1.0, ONFI 2.0, ONFI 3.0, ONFI 4.0
Control: Async: CE#, R/B#; RE#, ALE, WP#, CLE, WE#
NV-DDR: CE#, R/B#; W/R#, ALE, WP#, CLE, CLK, DQS
NV-DDR2: CE#, R/B#, CLE, ALE, RE, WR, WP#, DQS
Variable Timing Edges: tDS, tDH
Programmable Timing:

Async: tCLS, tCLH, tALS, tALH, tWP, tWH, tDS, tDH, tWC, tADL, tCH, tWW, tCS, tRP, tRC, tREA, tRR, tOH, tWHR, tAR, tWB, tREH, tRHW, tWHR2, tBERS, tR, tPROG

NV-DDR: tADL, tCAD, tCALS, tDS, tCCS, tDQSCK, tDQSS, tRHW, tWB, tWHR , tWW, tWPRE, tWPST, tBERS, tPROG, tR

NV-DDR2: tADL, tCALS, tCALH, tCS, tCH, tAR, tRR, tWB, tWHR, tWC, tWP, tWW, tWHR2, tWPRE, tCAS, tCAH, tCDQSS, tCDQSH, tWPST, tWPSTH, tRPRE, tDQSRE, tRPST, tRPSTH, tBERS, tR, tPROG

DC System Specification

Variable Power Supplies: (Base on each site supply) VCC: 1.0 to 3.3V  
VCCQ: 3D - 1.2/1.8V
2D - 1.8V
 
VREF: 0.5 to 1.0V  
(Resolution 1mV, ±1%)
DUT Idd's Measure: For 8 DUT NF Idd Measurement
Range 0:
Standby Idd
1uA to 5mA Accuracy: 1uA+1%
Range 1:
Opt Idd
5mA to 100mA Accuracy: 1mA+1%
Range 2:
Opt Idd
100mA to 1000mA Accuracy: 10mA+1%
Leakage/Contact: VSIM Force Voltage Range: 0V to 2V
Measurement Current:
Range 1: 1uA to 200uA, Accuracy: ±(1uA+1%)
Range 2: 200uA to 2mA, Accuracy: ±(5uA+1%)
Range 3: 2mA to 32mA, Accuracy: ±(50uA+1%)
Power Short Pins: (optional) Power Short Resistance
(For Room Temperature)
Accuracy
VCC -> VSS
VCCQ -> VSS
VREF -> VSS
20 ohm to 1K ohm ±20 ohm

eMMC Support Features

Speed Mode: Supports High Speed, HS200 and HS400
Test Function: Provides DC / ICC / AC parametric tests
Supports DC short and Leakage testing
Read ID Function: CID (Device Identification Register) Read
CSD (Device-Specific Data) Read
Extended CSD Register Read
User Function: User Area Erase
User Area Data Write - Single-block Write and Multiple-block Write
User Area Data Read - Single-block Read and Multiple-block Read

PC Requirements

PC System: Windows 7 or above, Networking interface
AC Power Source: 110-240VAC, 50/60Hz
External PC Requirements: Executes software to control station operation
Windows 7 operating system or above, i7-core or above, 8G RAM or above, CD ROM, LAN Port x2, USB Port, 1920 x 1080 monitor, Keyboard, Mouse, Display Card or On Board Display
Recommend Temperature Condition: 16°C to 32°C (60.8°F to 89.6°F)
Humidity Limitation: 20°C to 80%

Software Screenshots:

Home Screen

Script Code Program

Signal Tap Tool

Security Privilege

Test Device

Test List

TURBOCATS, LTD. RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT NOTICE. Products and specifications discussed herein are for reference purposes only. All information discussed herein is provided on an "AS IS" basis, without warranties of any kind.